As the name suggests, prefabricated parquet is a wooden floor that is ready to be laid. Prefabricated parquet consists of several glued layers, as well as a lacquered or oiled surface. The wooden floor can be walked on after laying and no further surface treatment is necessary. Within the multi-layer parquet category, there are 2-layer and 3-layer parquet.
2-layer parquet is made up of a wear layer and a core layer. The total thickness is approx. 9 to 12 mm. 2-layer parquet cannot be laid as a floating floor. It must always be glued over the entire surface to a suitable substrate (e.g. screed or laying panels). For this reason, it is recommended that 2-layer parquet is only laid by professional floor layers.
Floating installation means that the planks are not bonded to the subfloor. They are pushed together and laid on a suitable underlay mat without any additional fixing (e.g. adhesive). The floor therefore “floats” on the subfloor, so to speak. The advantages here are quick and easy installation, fewer requirements for the sub-floor, no adhesive consumption and additional flexibility.
Here the planks are glued to the substrate over the entire surface. This type of installation is recommended on underfloor heating, for installation in bathrooms and generally in the commercial sector.
The advantages are less footfall sound, less bounce when walked on and more effective heat transfer with underfloor heating. In addition, glued boards are particularly durable.
Laying our floors on underfloor heating is generally not a problem. In order to achieve optimum thermal conductivity, it is essential to observe the specifications in the installation and care instructions.
The grading of parquet flooring is defined on the basis of visual characteristics such as sapwood, flakes, knots, color differences, etc. Each grade is characterized by different features and summarizes similar looking wooden surfaces. This ensures a harmonious overall appearance of the wood flooring. The standardized grades are defined in accordance with EN 13486.
Fladerung is a certain dark pattern in the wood. It is created when the wood is cut parallel to the trunk axis. This saw cut causes the annual rings to appear as parabolic curves on the surface of the wood.
Sapwood can be visible as small light-colored streaks on wooden floors. Sapwood can vary in thickness and length and can run through the wood in different directions.
The classics. We present our most popular installation variants here.
On request and with our “Creative Parquet”, there are countless other sample installations with which there are no limits to your imagination.
Brick pattern
Wild bond
Herringbone
60 degrees
Herringbone
90 degrees
Parallel
To give you a better overview of our variety of formats, we have simply divided them into S, M, L and XL. If you want to know more, you can read which formats are behind it.
The following formats can be found under the “S” category (L x W):
480 x 240 mm
500 x 70 mm
690 x 140 mm
774 x 129 mm
The following formats are summarized under the “M” category (L x W):
630 x 90 mm
720 x 240 mm
The following formats fall under the heading “L” (L x W):
1000 x 90 mm
1400 x 140 mm
We classify the following formats in the “XL” category (L x W):
2000 x 151 mm
2030 x 200 mm
2100 x 183 mm
2100 x 190 mm
2200 x 206 mm
2376 x 271 mm
2400 x 240 mm
We offer our floors completely natural or in other wonderful colors. We call our colored floors “Colourline”.
Oak calcit
Oak diamant
Oak saphir
Oak topaz
Oak beryll
Oak kristall
Oak bernstein
Oak amber
To give each type of wood the perfect finishing touch and emphasize the special properties of our parquet, we have refined our floors.
Each surface has its own advantages, which are explained in more detail below
Our lacquered parquet is provided with lacquer layers made of almost 100% transparent lacquer. With a strong, 7-layer matt finish with the highest abrasion class C according to ÖNORM. This makes the surface almost scratch-resistant, elastic and the wood color is reproduced unaltered.
Our oiled parquet is refined with high-quality, hard-wearing oxidative (air-dried) oil. Oxidative oiled parquet ensures a particularly natural and healthy living environment as well as a pleasant barefoot feeling. The wood colors and the grain are enhanced by the oiling and are even more effective.
A particularly scratch-resistant and hard lacquer for our B: hard surfaces.
The Stöckl Pure finish gives the surface a particularly natural and matt look. This ensures a timeless style that gives the parquet the finishing touch. This refinement not only brings a puristic look, but also makes it easier to clean and care for your parquet.
Soft wooden parts are removed by mechanical brushing of the surface. This results in a subtly reinforced wood structure.
Striking structure with saw marks on the surface of the wooden stick.
Irregular, clearly noticeable and visibly wavy look on the parquet surface.
Optically and haptically very well worked out wood structure
Our product family consists of three members. EPICO, B: HARD and ACTUS. Each product line is characterized by different properties. Find out more about which member is best for you.
EPICO is our large-format variant in a country house style. This member of our product family is particularly varied in all colors and variations. A versatile natural talent.
Largest format: 2400 x 240 mm (L x W),
Smallest format: 1400 x 140 mm (L x W).
EPICO modern is a variant of our classic EPICO parquet that can be laid in a herringbone pattern. Format: 690 x 140 mm (L x W)
B: HARD is our Power Wood, which (as the name suggests) is characterized by a reinforced wooden surface. This surface is refined with a special technology and thus gets its particularly robust properties. This makes it the ideal companion for anyone who wants a particularly hard-wearing floor and yet does not want to do without the pleasant feeling of a real wooden floor when walking barefoot.
Format: 2200 x 223 mm (L x W)
B:hard modern is also the herringbone version with a format
of 774 x 129 mm (L x W).
Our ACTUS is the traditional parquet strip. It is characterized by small and fine sticks. Ideal for a wide variety of laying patterns such as herringbone and Co. Largest format: 1,000 x 90 mm (L x W), smallest format: 500 x 70 mm (L x W).
Every parquet floor is characterized by its uniqueness. Through every shade of color, every branch and every structure. We sort our bars and put together what belongs together.
The “select” and “exquisit” grades are quiet grades. This means that there are small natural color differences, a very simple appearance, light flares and no or only small point knots on the wood surface. Thus a very calm, exquisite and elegant appearance.
We call our “style”, “natur” and “design” grades natural. They have small to natural color differences, small knots, a low proportion of sapwood and light flakes. Thus the “classic” sorting.
“character,” “struktur”, “lebhaft”, “ambiente”, and “crack” fall under this category. A lively appearance, clearer color and structure differences, thicker flats, small to medium-sized putty knots and a proportion of sapwood characterize our lively sorting. Ideal for a rustic and exciting look.
